Beurer FT 85, Инструкция по эксплуатации

Страница: 30 / 164

30
7. Switching on and setting the thermometer
To switch on the thermometer, briefly press the / SCAN button.
After a brief self-test and two short beeps the thermometer is ready for forehead measurement. The device always starts up in
forehead temperature mode .
Set the basic functions
This menu allows you to set the following functions individually, one after another.
Temperature measurement unit Time format Date Time Illuminated display Acoustic signal
Temper
atur
e measur
ement unit
Insert the batteries or press and hold the LIGHT/SET button for 3 seconds when the ther-
mometer is switched on. The temperature measurement unit flashes on the display (Fig. 1).
You can set the device to display the temperature in degrees Celsius (°C) or degrees Fahr-
enheit (°F).
• To display the temperature in Celsius, select °C using the MODE/MEM button and con-
firm with the LIGHT/SET button.
• To display the temperature in Fahrenheit, select °F using the MODE/MEM button and
confirm with the LIGHT/SET button.
Fig. 1
Time format
The time format flashes on the display (Fig. 2).
• Use the
MODE/MEM button to set your preferred time format, and confirm with the
LIGHT/SET button.
Fig. 2