Beuchat Phare 30W, Руководство пользователя

Страница: 12 / 18

Control before diving :
The reflector must be completely secured (without exces-
sive screwing).
The safety button must be on its locked position (left).
Turning on the Light a few seconds, the red indicator
must be off.
CAUTION :
The use of the guard on the block reflectors masks
threading, it is thus imperative to precisely control
the tightening of the port-hole before dive. Remove
protection, for a visual control or to make screwing
"with the contact", metal on metal, then unscrew of
a few millimetres to release threading.
Light 30 / 50 Watts. Do not turn-on the light for
more than 2 minutes when out of water with a 50
W bulb.
Bulb replacement
How to proceed with the replacement of the bulb :
1
Make sure the rotating switch is in the off position
“ Charge - OFF ”.
2
Unscrew the reflector.
3
Take the bulb with a clean cloth and remove it.
Caution : Don’t force the bulb sideways to avoid
breaking the broaches in the glass.
4
Take the new bulb (with a dry and clean cloth) and
insert vertically in its support until it stops.
5
Screw on the reflector checking the lubrication and
cleanness of the O’ring.
6
Try the new bulb by turning on the Light a few seconds
(10 seconds maximum).The bulb must remain clear.
26 > User guide / Bulb replacement