Beuchat Mundial 2, Руководство пользователя

Страница: 20 / 30

20
© 2002 Design, 2012 Doc. No. 12-5290-r01 (6/13/12)
User Manual
SET WATER TYPE, information includes (Fig. 59):
> Graphics TYPE and H2O.
> Graphic SEA (or FrESH) flashing.
• S (< 2 sec) to toggle between SEA and FrESH.
• A (< 2 sec) to save the setting and access Set DSD.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
SET DSD, information includes (Fig. 60):
> Graphic DSD (meaning Dive Start Depth).
> Depth flashing, with M (or FT) icon.
• S (< 2 sec) to step upward through the Set Points of 0,6 , 1,2 , 1,8 M (2, 4, 6 FT) one at a time.
• M (< 2 sec) to step back through Set Points one at a time.
• A (< 2 sec) to save the setting and access Set Units.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
SET UNITS, information includes (Fig. 61):
> Graphic UNIT.
> M icon and C graphic (or FT icon and F graphic) flashing, with degrees icon
• S (< 2 sec) to toggle between Metric (M, C) and Imperial (FT, F).
• A (< 2 sec) to save the setting and access Set Backlight Duration.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
SET BACKLIGHT DURATION, information includes (Fig. 62):
> Graphics GLO and durA (meaning Backlight Duration.)
> Time (min:sec) flashing, with TIME icon.
• S (< 2 sec) to step upward through Set Points of 0:00, 0:05, 0:10, 0:30, 1:00 (min:sec) one at a time.
• M (< 2 sec) to step back through the Set Points one at a time.
• A (< 2 sec) to save the setting and access Set BDSI.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
SET BDSI, information includes (Fig. 63):
> Graphic BDSI (meaning Between Dive Surface Interval).
> Time (min:sec) flashing, with SURF and TIME icons.
• S (hold) to scroll upward through the Set Points at a rate of 8 per second from 0:01 to 1:00 (min:sec) in increments of :01 (1 sec).
• S (< 2 sec) to step upward through the Set Points one at a time.
• M (< 2 sec) to step back through the Set Points one at a time.
• A (< 2 sec) to save the setting and revert to Set U.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
SERIAL NUMBER (SN)
• A & S (2 sec), while viewing Set U, to access SN.
Information includes (Fig. 64):
> Graphic SN.
> Factory programmed Serial Number.
> Firmware (Mundial 2's operating software) revision number (e.g., graphic r1A).
• A & S (2 sec) to revert to SURF MAIN.
• M (2 sec), or no button (2 min), to revert to SURF MAIN.
This information will be required if a unit is sent to Beuchat for evaluation or service. Record it in the table provided in
the back of this manual, and retain the sales receipt.
Fig. 62 - SET BACKLIGHT
Fig. 63 - SET BDSI
Fig. 64 - SN
Fig. 61 - SET UNITS
Fig. 59 - SET WATER
TYPE
Fig. 60 - SET DSD