Better Water LLC; rev. Apr 2017
Page 4 of 20
Cartridge Based Pyrogen Filtration System
(2-4 Filters)
Operator Manual
GENERAL REQUIREMENTS & SPECIFICATIONS
1. Water requirements:
a.
A properly pretreated water supply consisting of RO/DI product water.
-
Better Water recommends 1.2 megohms as the minimum for DI water (AAMI standard is 1
megohm), but these minimums are set by the Medical Director.
b.
Pressure: 30-100 psi
2. Electrical requirements:
None
3. Drain requirements:
This equipment does not require a drain.
4. Floor space:
This unit is normally assembled at Better Water LLC and mounted to the wall
surface. Requirements: Approx. 24
” (depth-
from wall
) x 36
” (width-
along the wall
) x 36
” (height-
up
the wall
); maximum for a 4 filter device.
MODELS
There are six models of the 2-4 Cartridge Based Pyrogen Filtration System with the difference
being the number of filters, and the filter used. The operation and service for these models are
basically the same with only a slight physical difference between them.
Model
Number of Filters
Type of Filter
EQASSY0.75KB2.03
2
.03 micron filter
EQASSY0.75KB3.03
3
.03 micron filter
EQASSY0.75KB4.03
4
.03 micron filter
EQASSY0.75KB2.05
2
.05 micron filter
EQASSY0.75KB3.05
3
.05 micron filter
EQASSY0.75KB4.05
4
.05 micron filter