25
Step:
1. One hand holds the scooter backrest frame, the other hand grabs at the battery tube to the outside, and at
the same time presses the connecting rod to the largest extent, open the back parts of the electric scooter.
(When you press the connecting rod group, make sure that fixed card in stuck range)
2. Push the backrest back to the largest extent, at the same time, make sure that if the wire is bounced to
the hole location of the backrest frame. (Before use the scooter, the user must make sure that the thread
locking pin had bounced the fixed hole location, otherwise, it can cause harm to user)
3. Install the seat cushion and make sure that the felt has aligned and mated.
4. Adjust the PU to the appropriate angle.
5. Install the control panel (see the page of install control panel)
