Better Packages BP555e, Руководство по обслуживанию

Страница: 24 / 36

Better Packages Inc.
24
Solenoid connector to pc board
Blade Oiler
(Note: Always unplug machine when performing service on machine)
Procedure
1. Remove bottle, tank and brushes
2. Remove right and left side covers.
3. Loosen the screw on the upper right side frame holding the retainer
bracket in place
4. Lift the bracket and remove the 2
nd
shaft out to remove the used oiler
5. To install the new one, put the shaft in from the left side. As the shaft is
being inserted place the new oiler in and be sure that the shaft is going
through the oiler
6. Do not put shaft all the way through. Place the oiler spring at the right
side holding it with a pair of needle nose pliers.
7. The spring has to lay flat on the lower tape plate. Than you can get the
shaft to go through the spring. Now take the upper part of the spring
that is being held with the pliers and bring it to the left of the oiler
bracket where the bracket has a bend on it. Let the spring go.
8. Lock the shaft back into place with the bracket and tighten the screw.
9. Replace the left and right side covers
10. Replace the tank, brushes and water bottle
SPRING