RISK OF ELECTRIC SHOCK
DO NOT OPEN
Taking apart or modifying the
receiver may lead to electric shock,
fire, or damage to the receiver and
will void your warranty.
DC-POWER
DC 14~16V 600mA
UNBALANCED
Receiver A & B
MIXED OUTPUT
0
3 6 1 2 0 0 7 1 0 2 3 - 9 2
3
Model No.
VM-92U
(UHF Microphone)
CALIFORNIA, UNITED STATES OF AMERICA
COMMENTS? E-MAIL: [email protected]
www.BetterMusicBuilder.com
ENGINEERED AND DESIGN IN U.S.A.
FCC: 74.861
SERIAL NO.
Better Music Builder
®
Channel B
Channel A
ANTENNA-B
ANTENNA-A
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Taking apart or modifying the
receiver may lead to electric shock,
fire, or damage to the receiver and
will void your warranty.
DC-POWER
DC 14~16V 600mA
UNBALANCED
Receiver A & B
MIXED OUTPUT
0
3 6 1 2 0 0 7 1 0 2 3 - 9 2
3
Model No.
VM-92U
(UHF Microphone)
CALIFORNIA, UNITED STATES OF AMERICA
COMMENTS? E-MAIL: [email protected]
www.BetterMusicBuilder.com
ENGINEERED AND DESIGN IN U.S.A.
FCC: 74.861
SERIAL NO.
Better Music Builder
®
Channel B
Channel A
ANTENNA-B
ANTENNA-A
7
HOW TO CONNECT AUDIO OUT
There are three different connectors as shown in the following diagram:
• Connector 1 is a channel B XLR-balanced audio out
• Connector 2 is a mixed audio output (Channel A and Channel B)
• Connector 3 is a channel A XLR-balanced audio out
Connector 1 (Channel B) is a balanced XLR audio signal. If you connect B to the
mixer or amplifier, then you can control the microphone effect on MIC. B only.
Connector 2 is an unbalanced 1/4 audio signal. If you connect to Connect 2
(1/4), both MIC. A and MIC. B will mix together to produce the same signal. If
you want to produce different effects on MIC. A and MIC. B, you need to
connect to XLR (Connector 1), which is equivalent to channel B, and XLR
(Connector 3), which is equivalent to channel A. You can also adjust different
echo or mic. tone effects on each microphone (i.e. MIC. A and MIC. B).
Connector 3 (Channel A) is a balanced XLR audio signal. If you connect A to the
mixer or amplifier, then you can control the microphone effect on MIC. A only.
UHF WIRELESS SYSTEM DIAGRAM
Audio Mixer Amplifier or a Karaoke Unit Input terminal
XLR
Balance Input
XLR
Balance Input
XLR
Balance Input
XLR
Balance Input
1/4"
Unbalance Input
1/4"
Unbalance Input
1/4"
Unbalance Input
1/4"
Unbalance Input
Rear View
NOTE
Channel A Hand-held Transmitter
32 CHANNEL SELECTABLE
Channel B Hand-held Transmitter
32 CHANNEL SELECTABLE
Connector 1
(XLR Balanced)
1
Connector 2
(Mixed A & B)
2
Connector 3
(XLR Balanced)
3
Balance Connection