Once the cable is connected, launch the program Karaoke
Pre-amplifier Controller v2.6 from the “Effect Control Software
Suite” CD.
Fig 1. Connecting Serial Port
Fig 2. Setting Serial Port
Fig 3. Available COM Ports
Fig 4. Read Data From Device
After the DX-6000 settings have been read, different param-
eters can be set. Different controls will be highlighted based
on the specific settings. Otherwise, the control will be
grayed-out and not adjustable.
Fig 5. Control Panel Settings
29
Fig 6. Echo/Reverb Effect Control Settings
The parameters adjusted can be saved to a program file (.kcc)
for future uses or saved directly to the connected DX-6000.
Save to program file (.kcc)
Fig 7. Save Program File
Fig 8. Save (.kcc) File
Save directly to device
Fig 9. Saving Data Directly to Device
After all parameters are set and done, disconnect out of the
program as follow:
Fig 10. Disconnecting COM Port
In the program, under
the Communication tab,
there is a drop down
list, select Connect.
If for some reason, there
was a COM port error,
then under the Commu-
nication tab, select
Serial Port Setting.
Select the available
Serial Comport (COM)
below and click OK to
confirm.
Once connection has been established, it will prompt either
to “Read Data From Device” or “Write Data To Device.” We
suggest starting off by reading the current settings on the
system as a reference
and then further make
adjustments accordingly.
Choose “Read Data
From Device.” Then click
OK to confirm.
