Better Music Builder DX-211, Руководство пользователя

Страница: 9 / 26

9
CONNECTING THE AUDIO OUTPUT SOURCE
CONNECTING THE VIDEO OUTPUT SOURCE
The DX-211 comes with two dedicated composite video
output. Typical connection usage such as for a small
classroom show in the diagram or it can be use similarly in
connecting to the amplifier with a KTV video touch screen
stand. If 3 or 4 more is needed, use an external composite
video distributor. If the wiring distance to the output source is
more than 25 feet. A composite video amplifier distributor is
needed; otherwise, the video will be very poor.
VIDEO PROJECTOR
RCA V
IDEO O
UT
OR
KTV VIDEO TOUCH
SCREEN STAND
RCA V
IDEO O
UT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Taking apart or modifying the receiver may lead to electric shock,
fire, or damage to the receiver and will void your warranty.
R L
SERIAL NO.
SAFETY
MARK
USA 020898-1 029536-28 ITEM NO. D030906
3 6 0 0 6 0 9 1 2 3 8 0
MODEL:
DX-211
DIGITAL STEREO MIXING
PROFESSIONAL AMPLIFIER
AC-POWER: 110V 60Hz
CALIFORNIA, UNITED STATES OF AMERICA
E- mail: info@be t t ermusicbuilder.com
w w w . B e t t e r M u s i c B u i l d e r . c o m
ENGINEERED AND DESIGN IN U.S.A.
DX-211 REAR VIEW
INPUT
PIN1: SIGNAL GND
PIN2:
PIN3: SIGNAL –
BRIDGE
PARALLEL
STEREO
50HZ
25HZ
5HZ
OFF
ON
OFF
ON
CH-1 BRIDGE IN
CH-2 BRIDGE IN
SERIAL NO.:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
BRIDGE
CH-1 OUTPUT
POWER CABLE
FUSE
CH-2 OUTPUT
-
+
CH-1
+
-
+
-
CH-2
SAFETY
MARK
USA 020898-11
020898-11
ITEM NO. D030905
MODE LF FILTER CLIP LIMITER GROUND
REAR VIEW
INPUT
PIN1: SIGNAL GND
PIN2:
PIN3: SIGNAL –
BRIDGE
PARALLEL
STEREO 50HZ
25HZ
5HZ
CH-1 BRIDGE IN
CH-2 BRIDGE IN
MODE LF FILTER
AUDIO (XLR) BALANCE OUTPUT
The Audio 1/4 unbalanced cable is a
standard audio signal connection. The XLR
balanced cable is a higher signal quality
connection which we strongly recommend
for best audio performance. However,
both types of connection
CAN NOT be
connected at the same time.
The audio signal from the mixing
amp output to the power amp,
therefore, all effect signals are
controlled by the pre-amp/mixer only.
The power amplifier only amplifier
the designed signal power level.