26
Assembly Instructions
27. Turn the previous assembly upright and insert the assembled drawers into the frame. Extend
the Ball Bearing Slide Tracks on the Panels all the way forward (including ball bearing cart).
Then align the Slide Runners on the assembled drawers with the Slide Tracks and push the
drawers carefully inside until it stops.
NOTE
: If the drawer does not go in smoothly, please take it out and repeat the step. If you
need to remove the drawer, please pull the drawer all the way out, then simultaneously push
the plastic release lever of the ball bearing slides up on one side and down on the other side,
and then pull it completely out.
If you choose table-top console configuration, continue to
the next step.
If mounting TV with the floating swivel mount, skip ahead
to PAGE 29.
A
O
N
L
O
N
L
