4
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Ask for assistance to align and attach the Bottom Stretcher (C) between the Legs (B) with the end dowels
fully inserted. Insert two 1 1/2" Bolts (1) with the Washers (2 and 3) through the drilled holes on the
Bottom Stretcher (C) and loosely tighten into the threaded inserts on the Legs (B).
C
1 2 3
B
B
1
2
3
③
x 2
②
x 2
①
x 2
DO NOT fully-tighten the bolts initially until all the bolts are ready to assemble.
To avoid causing damages to the thread, DO NOT over-tighten the bolts.
