G
D
STEP 1
A1
G
C
D
A2
E
E
B
F
E
E
F
Secure the hanger bolts with chain (H) into predrilled holes of right side frame (A1) using washers (E), nuts (F)
and head nut (J), as shown. (The hanger bolt with long chain must be install in front).
Repeat the same procedure to install the hanger bolts (H) into left side frame (A2).
Make sure all parts are correctly connected and tighten all nuts completely using wrench.
3
STEP 2
STEP 3
STEP 4
To hang up the swing :
Insert the hanging bolts (I) into predrilled holes of
swing frame and secure with washers (E) and nuts
(F) as shown.Tighten the nuts using wrench.
Insert and hang the hanger bolt with chain (H) to
hanger bolt (I) and lock.
Recommended height is 60 cm from the bottom of
the seat to the ground.
NOTICE :
Install not less than 6.5 feet
from any obstruction
such as fence, garage, house,
overhanging branch laundry
lines or electrical wires.
Install on level ground.
Attach the back support (B) and seat (C) into right and
left side frames (A1 & A2).
Secure using 1 1/4" bolts (D).
Tighten all bolts completely using screwdriver and
tapping in the wooden caps (G) to cover bolts head
using rubber mallet.
A2
A1
FRONT
F RO
NT
H
I
E
65 i
nch
8 FOOT CEILING
