7
Assembly Instructions
3.
Insert four 60 mm Wood Dowels (3) into the inner holes on the Top Panel (E) as a guide. Tap it in with
a rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all
dowels.
NOTE
: It is very important to use a small amount of glue on both ends of dowels.
4.
Align the drilled holes on the Left and Right Upper Side Panels (A and B) with the inserted Wood
Dowels (3) on the Top Panel (E), and then press them together. Attach the Upper Side Panels (A and B)
in place by engaging four Cam Locks (1) (Refer to Page 3 on Cam Lock system operation supplement).
B
A
E
1
3
M15 x 60 mm Wood Dowel
(4 used in this step)
③
Cam Lock
(4 used in this step)
①
