31
Assembly Instructions
38.
Now, go back and tighten all Cam Locks and Screws. Make sure that all the parts are tight and there are
no gaps between the parts. This will help keep the unit square.
39.
Flip the previous assembly around at its front edges. Position the Large Back Panel (H) to the back
edges of the right compartment. Make sure that the overlaps on the panels are even all the way around.
Secure the Back Panel (H) in place with the 15 mm Washer Head Screws (9).
NOTE: We recommend attaching the back panel with the screws at the corners first.
M3.5 x 15 mm
Washer Head
Screw
(14 used in this step)
⑨
9
D
H
B
C
