6
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts.
Assembly the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Securely screw 6 Cam Bolts (3) into the designated small holes on one Drawer Front (R).
3.
Connect Drawer Left and Right Side Panels (M and N) to the Drawer Front (R) by engaging two M6 x
30 mm Wood Dowels (7) and four Small Cam Locks (1) (Refer to page 3 on Cam Lock system
operation supplement).
4.
Fasten the Drawer Bottom Support (Q) to the Drawer Front (R) with two Small Cam Lock (1).
3
3
3
3
3
1
7
R
R
M
Q
N
Small Cam Lock
(6 used in this step)
①
Cam Bolt
(6 used in this step)
③
M6 x 30 mm Wood Dowel
(2 used in this step)
⑦
