Stock # BH40-084-902-50
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg. Inc.
Factory No. 75-14697
Page 4
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts.
2.
Place Table Top (A) upside down on a smooth & protective surface as shown in the detail #1.
3.
Attach 4 Legs (B) to the apron corners of Table Top (A) by inserting the Hanger Bolts pre-attached on
Leg through the pre-drilled holes on corner block, and fit Flat Washer (3), Lock Washer (2) and Nut (1)
onto each Hanger Bolt, then securely tighten the Nuts with the provided Open Wrench. See detail #1.
4.
Stand the unit upright.
Required hardware in this step
‘
Description:
(1) - Nut
(2) - Lock Washer (3) - Flat Washer
Sketch
Qty.
(8 pcs)
(8 pcs)
(8 pcs)
Tools required: Open Wrench
DO NOT fully-tighten the nuts or bolts initially until all the nuts or bolts are
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
