4
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts.
2.
Fasten the Middle Stretcher (C) between the two Aprons (D) by inserting four 5/8" Bolts (1) with the
Lock Washers (2) and Flat Washers (3) through the end brackets and screw into place.
1/4" x 5/8" Bolt
(4 used in this step)
①
Lock Washer
(4 used in this step)
②
Flat Washer
(4 used in this step)
③
D
D
C
D
C
3
2
1
DO NOT fully tighten the bolts initially until all the bolts are ready to
assemble. To avoid causing damages to the thread, DO NOT over-tighten the bolts.
