Better Health D3961, Инструкция по эксплуатации, Страница: 9 / 14

9
Maintenance
8. Remove the backing from the electrodes, and place them on the body parts you wish to
treat. Note; the electrodes must be used as a pair and there should be at least a 1cm
space between them.
9. Press the “FUNCTION” button until the “body” LED icon flashes. Then press the body
intensity button to +/- buttons to increase or decrease the intensity level. You should set
the intensity so that you can feel the pulses, but remain comfortable.
10. After use, remove the electrodes from the skin slowly and stick them back onto the
plastic backing.
11. Drink a glass of warm water after the therapy to help detoxification.
INFRARED FUNCTION
To switch on the infrared function, simply press the red infrared button on the left side of
the unit. To switch the infrared function off, just press the infrared button again.
MAINTENANCE
1. Before using the electrodes, make sure that the surface of the skin is free from sweat or
dirt.
2. Place the electrodes on the plastic backing after each use.
3. The electrodes should be removed from the skin slowly to protect the pectin.
4. Periodically rub a few drops of clean water on the electrodes to improve their adhesive
quality. Return the body electrodes to the white hard plastic protectors provided. Do not
immerse the device in water.
5. Clean the footpads with damp, soapy cloth. Do not clean the device or its accessories
with strong detergent.
6. Do not put the device in sunlight, damp areas or expose to high temperatures.
7. Store in a dry, dust free location.