4
Installation
1. Push the expanding plugs (part 1) into the holes on the toilet pan then place the
gaskets (part 2) between fitting pegs (part 3) and toilet pan. Next, place the long
screws (part 4) through the fitting pegs and gaskets and screw into the expanding
plug (part 1).
Please note:
Fit the screws loosely and do not fully tighten at this stage
2. Turn the fittings on the toilet so that they align with the holes on the seat, then push
the seat onto the pegs until it clicks into place. Gently move the seat so that it
aligns on the toilet pan.
3. Once the seat is aligned, tighten the screws into the fittings (as below) then once
the seat is secured, remove it by pressing both buttons and lifting away.
