10. Repeat this step until all folds are secure and in place.
11. Finish off by installing the last single blade.
NOTE:
If Split or Centre bunch has been ordered you install the blades as above but treat it as two individual blinds
12. Check folds for any misalignment and unclip and adjust fabric on hangers if necessary.
13. After installing use the wand to draw the blades in the required direction to check the mechanism’s operation and to make
sure that the fabric is not rubbing against any obstacles. Also, open, and close blades looking for any obstacles. This can
damage the blind if left untreated.
14. It is important when using this blind that it is operated
carefully
to prolong the life of the product and maintain the warranty
period.
15. Providing that the handling, installation and care and maintenance are carried out correctly, the quality of this product can
supply many years of trouble-free operation.
NOTE:
Video Link: How to get creasing out of a Veri Shade:
https://www.loom.com/share/cc3a45c17fdc4fefb676e7c0333f9afd
Maintenance and cleaning
The surface of the Veri Shades fabric and tracks will collect a layer of dust over time. Veri Shades fabric can be lightly hand
washed and dried. It can also with be ironed with a cool iron or steamed to remove the creases. Veri Shade track can be
cleaned with a feather duster, or slightly damp microfiber cloth to ensure the components are also dust free.
At least twice a year (or more in high-risk environments), silicone spray should be used to lubricate all the track gears. Before
spraying the tracks, remember to slide your Veri Shades fabric to one side or cover to avoid overspray. If spraying
insecticides or any harmful chemicals the Veri Shade fabric must be moved aside. These chemicals
must not
meet the
blinds.
Caution
Never use harsh cloths, harsh abrasives, chlorine or ammonia-based chemicals or cleaners on any Veri Shades surfaces as
they may affect the appearance, longevity, and warranty of the product
Warranty
Betta Blinds guarantee the quality on Veri Shade fabrics free from defects for two (2) years from date of purchase. We
guarantee our fabrics against fault of manufacture. Betta Blinds guarantee the quality on all our blind components free from
defects and/or failure for five (5) years from the date of purchase. The guarantee on Betta Blinds products does not cover
defects or damage caused by accidents, alterations, misuse, abuse, wear and tear or failure to comply with cleaning and
maintenance instructions. Betta Blinds does not warranty the fading of fabrics and timbers caused by direct and/or indirect
sunlight. Under the guarantee Betta Blinds shall not be liable or responsible for incidental or consequential damages or any
other direct or indirect damage, loss, cost, expense, or fee.
CHILDREN’S SAFETY REGULATIONS
:
To avoid creating a possible strangulation hazard for children, the corded internal window covering must be installed in such a way that
a loose cord cannot form a loop 220mm or longer at a height of less than 1,600mm above floor level.
No part of a cord guide may be installed lower then 1,600mm above floor level unless, the cord guide will remain firmly attached to a
wall or structure specified in the installation instructions when subjected to tension force of 70 N applied in any direction for 10 seconds
and the cord is sufficiently secured or tensioned to prevent the formation of a loop 200mm or longer.
If a cord guide is installed lower than 1,600 above floor level it must be designed to prevent a child from being able to remove the cord.
If a cleat is used to secure the cord it must be at least 1,600mm above floor level because a child is capable of unwinding a cord from
a cleat.
The person installing a corded internal window covering must attach a label to the corded window covering containing the
name and contact details of the person or company responsible for the installation.
They also must ensure that any warning label or swing tag supplied with the corded window covering remains attached to
the cord.
WARNING
:
CURTAIN AND BLIND CORDS HAVE
CAUSED THE DEATH OF YOUNG
CHILDREN AND MUST BE INSTALLED
SO THAT THEY ARE NOT A
STRANGULATION HAZARD. FOLLOW
THE INSTALLATION INSTRUCTIONS
Keep children away from all
cords/chains.
Move anything a young child can sit in,
stand in or climb on (like cots,
highchairs, beds, sofas, tables, chairs
and bookshelves) away from
cords/chains—even those tied around a
cleat, as your child may be able to untie
them.
Do not let your child play near
cords/chains they can easily reach.
Never leave your child alone in a room
