User manual
BETSO TCX-2
We recommend to set this option to „Enable“ or „ JAM“. Then you can
easily turn on and JAM TCX-2 to external TC source and avoid necessity to use
standard turning ON/OFF and jamming procedure.
7.1.7
Jamming
*
-
setting of jamming to external TC source
* This feature is available only with TCX-2+ FW upgrade.
Menu / Time code / Jamming
Once / Manual
TCX-2 can be jammed once without asking and
then user has to confirm next jamming
Continuous (BNC = TC input)
TCX-2 will be jammed without asking every
time new TC source is inserted
Disable
Automatic jamming is disabled. Useful for forced
master mode. Jamming is still available upon request
When jamming continuous option is selected, TCX-2 is set as TX and external
TC source is connected, every time measured TC offset exceeds 0.05 frames,
TCX-2 jams to this new time code.
7.1.8
Cross jamming
*
-
jamming TCX-2 with different TC frame rate
* This feature is available only with TCX-2+ FW upgrade.
Menu / Time code / Cross jamming
This function enables TCX-2 to be jammed from external TC source preserving TC frame
rate set in TC frame rate option (chapter 7.1.1).
Enable
Cross jamming is enabled
Disable
Cross jamming is disabled
©
Copyright BETSO ELECTRONICS s.r.o.
10