BTS43 BK8000L_AUX_20150713 V1.0_r0
8
3.
In this case, the device cannot be turned On, until you recharging the
battery at least 10 ~ 15 minutes, because the rechargeable battery
has not enough energy.
M.
Reset the device
1.
In some circumstances the device’s function may hanging and need to
reset. To reset the Bluetooth speaker;
2.
Press and hold the
“ (7)”
button and
“ (8)”
button at the same
time. The device is reset and will turn Off automatically.
3.
After that turn On the Bluetooth Speaker by press and hold the
“
(4)”
button.
Important:
Do not reset the device if it is proper working.
N.
Waterproof Handling
1.
The Bluetooth Speaker can handle a brief jet of water on its surface or
put is floating on water (IPX7 water resistant).
2.
However, it not recommended be operated under running water and
under no circumstance it should never be fully immersed in water.
3.
If strange sound phenomenon found, some water may be entered
into speaker’s chamber. In this case, just pour water out, the voice
will return to normal.
4.
Make sure that the splash proof
“Rubber Seal Cover (1)”
it tighten
closed at the right position, before use the Shower Bluetooth speaker
in bathroom or float on water.
5.
After use, always wipe the outside of the cabinet thoroughly if it
becomes wet with moisture or water splashes. This will help to
prevent the internal parts of the unit from entry of water and
possible moisture damage.
O.
Trouble Shooting
No power
•
Check battery is it charged with enough energy.
•
Check whether the device is in power OFF mode.
No sound
•
Check whether volume level is in lower position on
your speaker and mobile phone or PC/Mac.
•
Make sure that your Bluetooth device is within the
effective operation range.
•
Check whether the Bluetooth device is paired.
•
Check whether the Bluetooth device show
connected.
•
Check if you have selected the correct audio source.
No
response
from speaker
•
Restart the speaker by power Off and On.
