Indoor Use Only
Made in China H205412INST022015
6
Perm-O-Snap Lights
•
The lights on this tree have a patented internal lamp lock system that securely holds bulbs in sockets.
•
The included red tool, shown below, will help safely remove bulbs from sockets. Please be sure to use this
tool instead of grasping and pulling the bulb up which could result in the bulb breaking.
•
ALWAYS unplug power supply cord when replacing bulbs and fuses.
Insert the tool between the bulb and housing (1) until it is fully inserted (2) and bulb begins to separate (3):
Using the tool, gently pull the bulb straight out of the socket using a slight rocking motion:
SAVE THESE INSTRUCTIONS
FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
▪
Reorient or relocate the receiving antenna.
▪
Increase the separation between the equipment and receiver.
▪
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
▪
Consult the dealer or an experienced radio/TV technician for help.
1
2
3