Made in Thailand
H196431022012
Indoor Use Only
1
6.5’ Tinsel Tree Instructions
Included Parts:
Pre-lighted Tree Top.
Middle Section of Pre-lighted Tree.
Bottom Section of Pre-lighted Tree.
Replaceable lights and fuses.
Collapsible Stand with 3 triangular screws attached in a plastic bag.
Caution – Do not overload: Connect a maximum of three series or series parallel connected lighting
strings or decorative outfits to each load fitting. Do not interconnect different types of products.
Caution Notice: Before assembling the tree, test each section to ensure lights are working properly. Take
the plug stack from each section and plug it into an extension cord or power strip. If there is a light set
that does not light refer to the Trouble Shooting section below. If all light strands are working properly
continue setup. Repeat for each section.
Setup Instructions:
Step 1: Position and Set-Up Tree Stand
a.
Place tree stand in desired location.
b.
Unfold tree stand until the legs are perpendicular and the screw holes are aligned.
c.
Insert the tree screws into the screw holds and turn 3 – 4 turns only (if the screws are inserted too
far you will not be able to fully insert the tree pole).
