Made in Thailand
H196431022012
Indoor Use Only
3
Step 5: Make final adjustments to tree tips and decorate if desired.
Please note: a light strand will go out only if there is a missing, damaged, or loose connection in the
socket of the light; if a bulb is burnt out the strand will stay light.
Safety First:
Unplug power supply cord when replacing lamps and fuses.
NEVER
change fuse with the power supply cord plug in wall duplex.
Replace with GKI/Bethlehem mini lights only.
Avoid touching electric carrying parts with sharp or heavy object.
Care Instructions:
Be sure to replace burned out bulbs with replacement bulbs (included) as bulbs burn out. This will
extend the life of the remaining bulbs.
When not in use store in a cool dry location.
Trouble Shooting:
If a strand of lights is out this means that there is a missing bulb or a loose connection in the strand on
one of the bulbs. Follow these steps to check your strand.
a.
Check to be sure that all the cords are plugged into each other.
b.
If the item still fails to light after checking all plugs are plugged in, check the fuses in each light
strand – use only 125 volt fuse, 5 amp maximum.
Tree Storage:
Step 1
: Unplug power cord.
Step 2
: Remove decorations.
Step 3
: Lift each section directly up.
Step 4
: Separate the tree sections (starting at the top). Fold branches up to avoid crushing the tips. You
can tie the branches up to make the section easier to handle and set up in future years.
Step 5
: Unscrew tree stand to release the bottom section. Fold stand and tighten screws back into stand to
prevent losing the screws.
Step 6
: Store in cool dry area.
