BETCO XT3, Руководство оператора

Страница: 9 / 36

BATTERY CHARGING
REFER TO NEXT THREE PAGES FOR
BATTERY CHARGER OPERATION
AND BATTERY MAINTENANCE
Become familiar with and follow the instructions issued by the charger •
manufacturer.
Batteries should be charged after each period of use. Lead acid batteries •
do not develop a memory and need not be fully discharged before
recharging.
The charger is factory set to properly charger the size and type batteries •
that were supplied with your machine.
Charge only in well-ventilated area. Keep sparks or flames away from a •
charging battery.
Do not get the charger wet. •
Do not remove battery caps, the caps are vented. Caps on standard wet •
cell batteries. No caps on AGM batteries.
Do not charge machine in a wet area. •
Do not stand in a wet area when plugging in charger to the 110 volt •
receptacle.
Plug in the charger to a properly grounded 110 volt receptacle. •
Lights will indicate the charging status. •
Charger will shut off automatically when batteries are fully charged. •
TO CHARGE BATTERIES:
OPEN DOOR •
REMOVE ELECTRICAL CORD •
PLUG INTO 11O VOLT OUTLET •
BATTERIES WILL BEGIN CHARGING •
BETCO CORP. 6/22/07 Page 9 XT3 BATTERY BURNISHER