background image

5

•  Only wipe the appliance clean with a dry (or very slightly damp) cloth while it is unplugged. Never place the appliance in 

water. 

•  Never clean up anything that is burning or smoking, such as cigarettes, matches, hot ash, etc.
•  Never place any items in the appliance openings. Never use the vacuum cleaner with openings blocked in any way; keep 

them free from dust, dirt, hair and anything else that might reduce air fl ow. 

•  Do not clean up toner powder. The toner used in printers and copiers can conduct electricity. 
•  Do not use the vacuum cleaner without a dust bag and/or without the fi lters in place. Dust bags need to be disposed of and 

can be used only once. Do not try to re-use them.

IMPORTANT: The manufacturer cannot accept any liability for damage to peo ple or property caused by improper use, 
maintenance carried out by persons without the proper authorisation, the use of non-original or unauthorised spare parts, 
or any form of tampering with and/or changes made to the original pro duct.

The manufacturer reserves the right to make changes to the appliance and/or accessories supplied without any prior 
notice.

GENERAL SAFETY INFORMATION

Содержание HF14

















Отзывы: