General Instructions for the CREWMAN
DC2000
Operating Instructions
Check machine for damage to cord or plug.
L6SHHG%XUQLVKLQJSDGV´RU´GLD
meter.
To install or change the pad:
1. Unplug the machine.
2. Tip the machine back on the wheels.
3. Remove the center-lock.
4. Center the pad on the pad driver.
5. Replace the center-lock and tighten securely.
To operate the machine:
1. Plug into a grounded outlet.
2. Release the handle and lower it.
3. The handle can be locked into a comfortable position
for the operator or used free floating.
4. Press the safety lever and squeeze the trigger to start
the machine.
5. Do not operate in one place as damage to the floor or
finish could result.
6. The machine should be operated in the green area
of the meter on the handle. Turn the knob on the
back to increase or decrease the pad pressure.
7. Do not operate the machine with the handle in the
upright position.
8. Remove the pad after every use.
9. Use only new or clean pads and reverse them
as needed.
Specifications:
Length - 30 in.
Width - 22 in.
Height - 50 in.
Weight - 69 Lbs.
Pad Speed - 2000 RPM
Pad Diameter - 20 in.
Drive motor - 1.5 HP, 120v, 15 A, 50/60 HZ
Cord - 14-3 ST, 75 ft.
Safety
Read and understand the manual before operating
this machine.
'RQRWRSHUDWHLQH[SORVLYHDUHDVRUXVHQHDU
flammable liquids or gases.
$WWDFKRQO\WRSURSHUO\JURXQGHGRXWOHW
'R
not expose to rain, store indoors.
'RQRWRSHUDWHWKHPDFKLQHZLWKDGDPDJHG
cord or plug.
'RQRWEORFNRUGLVFRQQHFWWKHVDIHW\OHYHU
Do not leave the machine plugged in
while unattended.
8QSOXJWKHPDFKLQHEHIRUHVHUYLFLQJ
'RQRWSXWILQJHUVXQGHUWKHSDGRUSDGKROGHU
Unplug the machine before installing or
removing the pad.
2
8VHRQO\ZLWK+L6SHHG%XUQLVKLQJSDGV
Maintenance
To maintain appearance - wipe the machine with a damp cloth
after use.
Warning
- Unplug the machine before servicing
The operator should check the following at 250 hour intervals:
1. Check the motor brushes for wear or
excessive arcing.
2. Check the cord and electrical system.
3. Check the safety lockout on the trigger.
4. Check wheels and bearings.
5. Check the Dust shroud and brush seal.
6. Check the Dust bag before each use.
BETCO US WARRANTY POLICY
10 Year Coverage
Subject to the conditions stated below, Betco warrants parts and labor on ro-
tationally molded polyethylene tanks/housings and injection molded vacuum
head assemblies to be free from defects in materials and workmanship for a
period of ten years to the original purchaser.
3 Year Coverage
Subject to the conditions stated below, Betco warrants parts and labor on all
other Betco components to be free from defects in materials and workman-
ship for a period of three years to the original purchaser.
1 Year Coverage
Subject to the conditions stated below, Betco offers a limited warranty on
parts and labor on the following equipment, parts and accessories to be free
from defects in material and workmanship for a period of one year to the
original purchaser. DM Series Vacuums: #85506-00, #85507-00 Bac Pac Lite
Vacuum: #85903-00 FiberPRO
®
Floor Dryer: #85507-00 WORKMAN
Series
Vacuums: #85024-00, #85025-00, #85026-00, #85027-00 CV100T Vacuum:
#85023-00. All Tools and Accessories/All Battery Chargers/All Batteries are
pro-rated for 1 year.
Allowable Travel Time Warranty Reimbursement
Eligible equipment: All battery and propane powered equipment products.
Warranty period: 90 days from date of sale to the original purchaser. A maxi-
mum 60 mile round trip at 44 cents per mile will be allowed for warranty
consideration.
Propane Machine Warranty:
Honda engines are warranted by Honda for a period of 2 years against manu-
facturer defect. Kawasaki engines are warranted by Kawasaki for a period
of 2 years against manufacturer defect. All other components (except wear
items)* are warranted by Betco for a period of 3 years.
*Wear items exempt from warranty consideration include but may not be
limited to: power cords, transport wheels, vacuum bags, belts, squeegee
blades, pad drivers, clutch plates, handle grips, filters, screens, throttle
cables, brushes and carbon brushes.
Subject to the conditions and excep-
tions stated in this warranty, Betco warrants the Betco products to be free
from defects in material and workmanship, under normal use and service,
for the periods listed under the warranty policy to the original purchaser. At
any time during the warranty period, Betco will furnish replacement parts for
the Betco products to the original purchaser. Such parts will be furnished and
charged including transportation costs, to the original owner through any
Betco authorized Service Distributor. If the original part is returned within the
warranty policy period from date of delivery for inspection by Betco and is
found to be defective, the owner will be credited for the cost of replacement
parts plus shipping and handling. Replacement parts that have become de-
fective through wear or abuse are not included in this warranty.This warranty
does not apply to damage or defect caused by accident, misuse, negligence,
fire or to any Betco product which has been serviced or repaired by other
than an authorized Betco Service Distributor or Betco factory personnel.
This warranty is void if products are used for any purpose other than that
which was intended. There are no other warranties expressed or implied. In
no event shall Betco be liable for incidental or consequential damages or any
damage to person or property. (Please note some states do not allow the
exclusion or limitations for incidental and consequential damages.)
