Betafence R2000, Руководство по установке

Страница: 28 / 40

28
Robusta SC
2) Close the gate so that there is 10mm to 20mm
between the upper guiding rollers on top of the
wing and the bottom of the catcher on the lock
post.
3) Loosen the counter nut. Turn the threaded rod
anti-clockwise so that the rubber stop protrudes
out of the under beam by 5mm to 10mm.
Re-tighten the counter nut.
4) Replace the cover plate to close the under beam
and tighten the screws with moderate force.
6. Motor height Adjustment:
1) Place the wing into the position where it is being supported by both the
front and rear roller assemblies.
2)
Push the lever operated release system(see picture) into the motor.
The motor is blocked the wing now.