2
OPERA
TION
24
GB
CHECKS BEFORE AND AFTER USE
For safe driving and long vehicle life you should:
1 Check all fluid levels.
2 Check the correct operation of the brakes and brake pad wear (page 45).
3 Check pressure, general condition and thickness of tread
(page 10).
4 Check that the spokes are properly tightened.
5 Check the tensioning of the chain (page 53).
6 Check the adjustment and the operation of all the cable controls.
7 Inspect all the nuts and bolts.
8 With the engine running, check the operation of the headlight, the rear and
brake lights, the indicators, the warning lights and the horn.
9 Wash the motorcycle thoroughly after off-road use (page 59).
BREAKING IN
The breaking-in period lasts approximately 10 hours, during which it is advisable to:
•
Avoid travelling at constant speed.
•
For the first 3 hours of use, the engine should only be used at up to 50% of its power.
The engine speed should not exceed 7000 rpm.
•
For the next 7 hours of use, the engine should only be used at up to 75% of its
power.
WARNING:
After the first 3 hours to replace the engine oil.
This procedure should be followed each time piston, piston rings, cylinder, crankshaft or
crankshaft bearings are replaced.
