PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
PRODUCT SPECIFICATIONS
CHUCK CAPACITY
1.5 ÷ 13 mm
SPINDLE THREAD
1/2” 20 UNC
FREE SPEED
400 rpm
POWER
0.34 kW
AIR INLET
1/4” GAS, cone-shaped
MAXIMUM PRESSURE
6.2 bars
MINIMUM INTERNAL HOSE SIZE (Ø)
10 mm
MAXIMUM AIR CONSUMPTION
180 l/min
WEIGHT
1.6 kg
OVERALL LENGTH
210 mm
SOUND PRESSURE LEVEL
89 dB(A) (EN ISO 15744)
SOUND POWER LEVEL
101 dB(A) (EN ISO 15744)
VIBRATION LEVEL
<2.5 m/s
2
(ISO 28927-2)
KEY TO SYMBOLS
a: side handle
b: air inlet 1/4” GAS
c: chuck reverse lever
d: chuck trigger
e: front nut rotation
f: open
g: closed
h: rear nut
i: front nut
l: oil
lubrication
INSTRUCTIONS FOR INSTALLING DEVICES
Side handle installation
Fit the side handle
(picture 2)
onto the cylindrical sleeve of the pneumatic tool; then lock it by turning the knob. The side handle can be
so adjusted as to allow an absolutely convenient and firm working position to be taken.
Air supply connection
For optimal use of the pneumatic tool, always keep to a maximum pressure of 6.2 bars, as measured at the tool inlet. Feed the
pneumatic tool with clean, condensate-free air
(picture 2)
. Excessively high pressure or humidity in supply air results in shorter life for
the mechanical parts and may damage the tool.
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk analysis survey if
the values exceed the limits under current regulations.
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL FOLLOWING A
SPECIALLY CONDUCTED SURVEY ACCORDING TO LEVEL OF DAILY EXPOSURE OF HAND-
ARM SYSTEM TO VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS
Содержание 019320004
Страница 1: ...Beta 1932B13 Operation manual and instructions...
Страница 2: ...Beta 1932B13...
