Beta Three R12a, Руководство пользователя, Страница: 7 / 18

COMP ACT LINE ARRA Y SOUND REINFORCEMENT S YS TEM
6
R6/R12a
8
7
6
5
4
3
2
1
0
R6a rear connecting
rod on the top
R6a rear connecting
rod at the bottom
Method of angle adjustment:
When the angle of hole against the connecting rod
o
hole is 0, insert the bolt, the vertical binding angle
of two cabinets is 0
°
.
INSTALLATION
(1) Open the package; take out R6a, R12a and the accessories.
(2) Install four U-rings into one flying frame.
(3) Demount the ball-catch bolt from the pulling plate of R6a,
place R12a pulling plate lockpin into the slot of R6a pulling
plate with holes against each other; put the ball-catch
bolt back.
(4) Insert connecting rod into R6a rear and angle-adjustment
slot of R12a on the bottom, adjust angle according to
practical needs.
(5) Install one or multiple sets of R6a by sequence onto the
bottom of the previous R6a.
Installation Guidance
M10 locknut
Flying Frame
R12a pulling plate
R6a pulling plate
components
R6a rear connecting
rod components
M8 locknut
Warning:
Make sure the mounting accessories safety
factor not less than 5:1 or meet the local standard during
installation .
Compact Active Line Array Sound Reinforcement System