Beta Motorcycles EVO 300cc 4T 2019, Руководство пользователя, Страница: 28 / 69

3
ADJUSTMENTS
27
EN
ADJUSTMENT OF GAS
CLEARANCE
The throttle control cable should always
have a 3-5 mm play. In addition, the idle
speed should not change when the han-
dlebars are fully rotated to the left or right.
To adjust the clearance proceed as follows:
- Loosen ring 1 .
- Rotate register
2
with respect to sheath
3
.
- Tighten ring 1 .
CLUTCH
The position of the lever is controlled
through the use of register
1 .
Once the position of the lever has been
changed, register
2 must be changed to
restore the initial correct clearance.
The idle stroke of push rod must not be less
than 0.9 mm
ATTENTION: reduced clearance
leads to premature wear of the discs
and overheating of the entire clutch
group.
0,9 mm
2
1
3
1
2