background image

 

Production Information

 

Darad Innovation recommends you to use the power controller system, gear change system, brake 

system, drive system and electric bike parts recognized and approved by  Darad  Innovation. Darad 

Innovation  has  a  series  of  rigorous  tests  and  verification  processes  on  these  systems  and  electric 

bike parts to ensure the reliability, safety and comfort of the product.  Darad Innovation is not in the 

position  to  evaluate  other  parts  despite  existing  survey  reports  available  in  the  market.  Therefore, 

Darad Innovation is not responsible for using these parts on our products. Do not use parts that are 

not approved by Darad Innovation, as they may compromise the safety of you riding the bike.

 

Approved  parts  and  replacement  service,  as  well  as  technical  advices,  are  available  at 

professional distributors authorized by Darad Innovation.  In a professional sense, these parts 

are fit for your electric bike.

 

 

 

User's Manual

 

 

Please  read  this  manual  carefully  before  riding  this  bike  for  the  first  time,  and  allow  yourself  to 

familiarize  with  this  bike.  For  the  safety  and  longevity  of  your  electric  bike,  please  follow  the 

instructions and warnings given in this manual. Failure to do so may result in damage of the bike o r 

risk of your safety.

 

You may select an electric bike that meets your specific needs  based  on the  model and standards 

provided in the manual, but there may be slight differences depending on countries. In some cases, 

your  bike  may  not  have  all  the  features  described  for  it  due  to  system,  function  and  safety. 

Therefore, your bike may be somewhat different from the descriptions and images. For any question 

regarding  the  bike  itself  and  how  it  is  operated,  please  consult  with  your  professional  distributor 

authorized by Darad Innovation. The following are covered in the delivery of the electric bike:

 

• Battery

 

• Charger

 

• User's manual

 

 
 

 

Ride Safely

 

 

• Important safety warning

 

• Accidents or falling objects

 

• Tipping over of bike 

The following ways of riding may lead to sudden malfunction of parts; for  example: 

• Damage of handle bar or saddle when riding the electric bike

 

• Malfunctioning brake

 

These present the risks of accident and injury. When something like this happens, it is important to 

have  your  bike  checked  by  a  professional  distributor  authorized  by  Darad  Innovation  immediately. 

When riding the electric bike, the bike is subject to heavy loads and wearing. Parts respond to these 

loads differently, and fatigue and wears are possible at various speeds. If the life cycle expires, the 

part may fail suddenly and there is a risk of accident or injury.

 

En

g

lis

h

 

Содержание PSF1




























Отзывы: