S-S-002029/14.0x21.0cm (58309E) JS-YF-2014-B-01645
S-S-002029
1. power button
2. button
3. volume- button
4. battery cover
5. speaker shield
Battery installation/replacement
1. Screw off the bottom cover of the speaker,
2. Insert standard 8 x AA batteries. Be sure that the polarity is“+” to “+”, and “-“ to “-“.
3. Replace the battery cover and screw tightly. It is ready to use.
Note:
Please be sure to screw the battery cover tightly, otherwise, the speaker will get damaged
due to water exposure.
IMPORTANT:
Please remove the batteries if you will not use the speaker for long time .
Operation
1. Press the power button for 3 seconds to active the notification tone and the light flash to start
up.
2. Open the Bluetooth device to enter into the search mode.
3. Choose “WABOT”. mode
4. You will know the connection was successful once you start hearing music.
Notes:
When the power is not enough, the speaker will be automatically closed. Please change
the batteries
Maintenance and Storage
1. When the speaker has water, reverse it to pour out the water or open the speaker shield to
drain away water.
2. Do not use too much force when cleaning speaker to avoid damages.
5
