Bestway AQUAROVER FLOWCLEAR, Руководство пользователя

Страница: 5 / 36

4
hair, body, and any loose parts of your clothing to make contact with the
suction hole of the robot during its operation.
-
Never insert body parts, clothing and other objects into the openings and
moving parts of the robot.
-
DO NOT use this robot to pick up any toxic substance, flammable and
combustible liquids such as gasoline, and in the presence of explosive or
flammable fumes.
-
Under no circumstances should you attempt to disassemble the robot and
replace the impeller, motor, and battery by yourself.
-
Never insert fingers and any object to touch the impeller.
-
This robot shall not be used by children.
-
The battery must be removed from the robot before it is scrapped.
-
This robot contains a battery that are only to be removed by skilled
persons.
-
The robot must be disconnected from the supply mains as the battery is
removed.
-
For detail regarding battery dsiposal, refer to the section "Battery Disposal”
in this manual
-
The battery must be disposed safely in accordance with local ordinances
or regulations.
-
The robot contains a maintenance-free, rechargeable lithium-ion battery
pack, which must be disposed properly. Recycling is required; please
contact your local authorities for more information.
- External adaptor and charging cable:

Never use the external adaptor and charging cable for anything
other than charging the battery of the robot that is supplied in the
same pack.

The external adaptor and charging cable should not be used
outdoors, nor should it be exposed to rain, humidity, any liquid or
heat.

The transformer ( or external adaptor) is to be located outside zone
1

Keep the external adaptor and charging cable out of reach of
children.

Never use the external adaptor and charging cable if any damage is
detected.

DO NOT handle the external adaptor and charging cable with wet
hands.

Keep the external adaptor disconnected from power when it is not in
use.

Never attempt to open the external adaptor.

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or an equally-qualified person in
order to prevent hazards of any kind.

Make sure the robot is completely dry before charging.