NOTES:
• Place the sand filter on solid,
level ground. Ensure the sand
filter is at least 2 meters away
from poolside. Keep distance
as far as possible.
• Pay attention to position pool
and sand filter so adequate
ventilation, drainage, and
access for maintenance is
available. Never place the
sand filter in an area that may
accumulate water, or on a
walking path with lots of foot
traffic.
• It is necessary to have the
plug accessible after
installation of the pool. The
plug of the sand filter shall be
at least 3,5m away from the
pool.
• Atmospheric conditions may
affect the performance and life
span of the sand filter; take
adequate precautions to
protect the sand filter from
unnecessary wear and tear
that may occur during periods
of cold or hot weather and/or
exposure to sun.
• Please examine and verify all
sand filter components are present before use. Notify Bestway at the customer service address
listed on this manual for any damaged or missing parts at the time of purchase.
• It is imperative to change as soon as possible all deteriorated parts. Only use parts approved by
the manufacturer.
• Do not allow children or adults to lean or sit on the apparatus.
• Do not add chemicals to the sand filter.
• When chemical products are used to clean the pool water, it is recommended to respect a
minimum filtration time to preserve the health of swimmers which depends on compliance of health
regulation.
• This product is not intended for commercial use.
3
Meaning of crossed-out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for
information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain,
damage your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge.
PUMP DISPOSAL
SPECIFICATIONS
PARTS REFERENCE OVERVIEW
Before assembling the sand filter, take a few minutes to become familiar with all the sand filter parts.
274mm
0.059m
2
(0.635ft
2
)
0.042MPa (6PSI)
< 0.021MPa (3PSI)
35°C
19
20
21
22
21
23
18
1
10
18
17
16
15
11
12
13
14
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
10
11
12
P6553
P6029
P6149
13
14
15
16
1
1
1
2
1
1
2
1
1
1
1
1
1
17
P6540
18
2
19
20
21
22
23
2
2
6
9
P6615
P6618
P6124
P6022
2
F4030
4
P6005
1
3
1
1
1
P6132
P6654
P6655
P6656
P6657
P6658
P6659
P6660
P6661
P6662
P6663
P6664
P6665
274mm
306mm
703mm
Pressure Gauge
Control Valve
Port D Cap
Top Flange Clamp
Top Tank
Piping
Flange Clamp
Bottom Tank
Pump
Washer
O-ring
Collector Hub
Skimmer
O-ring
Strainer
Seal Ring
Strainer Cover
O-ring
Adapter Nut
Hose Adapter
Hose Clamps
Hose
Debris Screen
REF.NO.
QTY.
DESCRIPTION
SPARE PART NO.
Filter Diameter:
Effective Filter Area:
Max. Operating Pressure:
Working sand filter pressure:
Max. Water Temperature:
Sand:
Sand Size:
Sand Capacity:
Not included
#20 silica sand, 0.45-0.85mm
Approximately 8.5 kg
S-S-001558
CAUTION:
This sand filter is for use with storable pools only. Do not use with permanently-installed
pools. A storable pool is constructed so that it is capable of being readily disassembled for storage
and reassembled to its original integrity. A permanently-installed pool is constructed in or on the
ground or in a building such that it cannot be readily disassembled for storage.
