3
NOTE:
• Be sure all provisions for wastewater disposal meet applicable local, state or national codes. Do not discharge water where it will cause flooding or
damage.
• When the Control Valve is set to the Backwash, Rinse, or Drain position, water will discharge from Port D on the Control Valve.
• Do not switch on or operate the sand filter with the Control Valve set to the Closed function or it will seriously damage the sand filter.
• Do not set the Control Valve between two functions, or it will lead to leaking.
• To avoid water leakage, screw the Port D Cap onto the Control Valve Port D before operating the sand filter.
HOSE ADAPTOR FUNCTIONS
Pool with Valves (Ф3.2cm)
1.
Connect the Adaptors (21) to the Hose.
2.
Place the loose Hose Clamps (22) in the end of Hose with Adaptor (21).
Backwash: This function is used to clean
the sand bed; water is pumped down
through the Collector Hub, upwards through
the sand bed, and deposited out of Port D.
Circulate: This function circulates pool water
bypassing the sand filter; use this function if
the filter is broken to collect debris in the
Debris Screens.
Drain: This function drains water from the
pool; another filter bypass setting, water is
pumped and deposited out of Port D,
instead of returning it to the pool.
Closed: This function stops water
flowing between the sand filter and
the pool.
Filter: This function is used to filter pool
water and should be positioned here 99%
of the time. Water is pumped through the
sand filter, where it is cleaned and returned
to the pool.
Rinse: This function for initial startup,
cleaning, and sand bed leveling after
Backwash; water is pumped downwards
through the sand bed, up through the
Collector Hub and deposited out of the
valve Port D.
Filter Diameter:
Effective Filter Area:
Max. Operating Pressure:
Working sand filter pressure:
Max. Water Temperature:
Sand:
Sand Size:
Sand Capacity:
437mm
0.150m
2
( 1.61ft
2
)
1.58Bar( 23PSI)
<0.56Mpa( 8PSI)
35°
C
Not included
#20 silica sand,0.45-0.85mm
Approximately 35kg
P6029
P6124
P6680
P61318
P61322
P61408
P6019
P6005
12
22
24
25
27
28
1
1
2
1
1
1
2
2
Washer
Hose Clamps
Debris Screen
Debris Screen
Debris Screen
T-Joint
Hose (Φ32mm)
O-Ring
OPTIONAL PARTS
P61204
P61138
P61205
P61209
P61213
P61206
P61211
P6581
P6580
P61212
P6614
P6029
P6540
P6560
P61214
P6561
P6562
P61210
P6563
P61208
P6916
P6124
P6517
P6615
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
26
1
1
2
1
1
1
1
1
1
1
1
5
1
1
1
1
1
8
1
1
2
4
2
1
Control Valve
Pressure Gauge
Flange Clamp
Hub Cover
Tank
Hub
Pollution cartridge
Drain Washer
Drain Valve Cap
Tank base
Garden Hose Adaptor
Washer
Port D Cap
Piping
O-Ring
Strainer Cover
Strainer
Filter Cartridge
Seal Ring
Pump
Adaptor
Hose Clamps
Hose (Ф38mm)
Adapter Nut
REF.NO.
SPARE
PART NO.
QTY.
SPECIFICATIONS
PARTS REFERENCE OVERVIEW
Before assembling the sand filter, take a few minutes to become familiar with all the sand filter parts.
22
2
7
12
22
2
7
22
22
28
28
25
24
P61318
P6680
P61322
690
m
m
6
33
mm
4
37
mm
CONTROL VALVE OVERVIEW
WARNING:
To prevent equipment damage and
possible injury, always switch off sand filter before
changing the Control Valve function. Changing
valve positions while the pump is running can
damage the Control Valve, which may cause
personal injury or property damage.
How to Use the Control Valve:
Press down on the Control Valve handle and rotate
to desired function.
CONTROL VALVE FUNCTIONS
The Control valve is used to select 6 different filter
functions: Filter, Rinse, Circulate, Backwash,
Closed and Drain.
S-S-004292
16
23
13
9
8
15
18
5
6
7
1
2
3
4
14
17
19
11
12
20
21
22
12
12
10
26
21
22
1.2 inch<
>1/2 in
P6680
P61318
A
B
or
P61322
>1/2 in
P61318
A
B
D
A
C
