S-S-005094
2
Preparation
Installation of small swimming pool usually takes only 10 minutes with 1 people
Recommendations regarding placement of the pool:
Do not install the pool on a slope or inclined surfaces, on soft or loose soil
conditions (such as sand or mud), or on an elevated surface such as a deck,
platform or balcony, which may collapse under the weight of the filled pool.
• It is essential the pool is set up on solid, level ground. If the pool is set up on
uneven ground it can cause collapse of the pool and flooding, causing
serious personal injury and/or damage to personal property. Setting up on
uneven ground will void the warranty and service claims.
• Do not set up on driveways, decks, platforms, gravel or asphalt. Ground
should be firm enough to withstand the pressure of the water; mud, sand,
soft / loose soil or tar are not suitable.
• The ground must be cleared of all objects and debris including stones and twigs.
• Check with your local city council for by-laws relating to fencing, barriers,
lighting and safety requirements and ensure you comply with all laws.
Drawings may not reflect actual product, not scaled to size.
Ref#
A
B
C
D
E
4
4
4
4
4
Top Rail A
Top Rail B
Vertical Pool Leg
Corner
Footing
Description
Pool Size & Quantity
48in. x 48in. x 12in.
(1.22m x 1.22m x 30.5cm)
Structure photo:
B
B
D
C
E
A
B
A
A
A
B
＋
＋
＋
＋
＋
＋
＋
＋
Parts:
Liner
Underwater adhesive repair
patch
E
D
B
C
A
Installation
Assembly can be completed without tools.
NOTE:
It is important to assemble pool in the order shown below. Adult assembly required.
A
B
Fig. 1
Fig. 2
A
D
B
Fig. 3
C
D
Fig. 4
C
E
1. Find solid, level ground and clear it of debris.
Attention:
Do not set up the pool under cables or under trees.
2. Spread out the pool and make sure it is right side up.
3. Cover the water valve.
4. Assemble the top rails. Connect Top Rail A to Top Rail B, ensure the
spring-loaded pins snap into the pre-drilled holes, and slide into the pole
sleeve (Fig.1). Please see the structure photo for detailed directions. Make
sure the top rails’ ends are in right position.
5. At the corners, insert the Top Rails (A & B) into the Corners (D). (Fig. 2)
6. Insert the Vertical Pool Legs (C) into the bottom of the Corners (D). (Fig. 3)
7. Attach all Footings (E) to the bottom of the Vertical Pool Legs (C). (Fig. 4)
8. Test the Frame to ensure all connections are secure before filling wit water.
9. Put 1in. to 2in. (2 to 5cm) of water in the pool to the cover the floor. Once
pool floor is slightly covered, gently smooth out all wrinkles. Start in the
center of the pool and work your way clockwise to the outside.
10. Continue to fill the water to the joint line. Please kindly pay the utmost
attention not over fill the pool for security reasons.
Dismantling
1. Open water valve on the bottom of the pool, water will drain automatically.
(Check local regulations for drainage by-laws). Then dismantle the frame of
the pool to release the water. Make sure release all the water in 20 minutes.
Note:
Drain by adult only!
2. Open the air valve on the top ring to deflate.
3. Air dry pool.
ATTENTION:
Do not leave the drained pool outside.
Repair
If your pool is damaged, use the provided repair patch.
1. Clean area to be repaired.
2. Carefully peel patch.
3. Press patch over area to be repaired.
4. Wait 30 minutes before inflation.
Pool Maintenance
WARNING:
If you do not adhere to the maintenance guidelines covered
herein, your health might be at risk, especially that of your children.
1. Change the water of pools frequently (particularly in hot weather) or when
noticeably contaminated, unclean water is harmful to the user’s health.
2. Please contact your local retailer to obtain chemicals to treat the water in
your pool. Be sure to follow the chemical manufacturer’s instructions.
3. Proper maintenance can maximize the life of your pool.
4. See packaging for water capacity.
Cleaning and Storage
1. After deflation, use a damp cloth to gently clean all surfaces.
Note:
Never use solvents or other chemicals that may damage the product.
2. Remove all the accessories and spare parts of the pool and store them
clean and dry.
3. Once pool is completely dry, sprinkle with talcum powder to prevent pool
from sticking together, fold pool carefully. If pool is not completely dry,
mould may result and will damage the pool liner.
4. Store liner and accessories in a cool, dry place out of children’s reach, with
a moderate temperature between 5°C / 41°F and 38°C / 100°F.
5. During the rainy season, pool and accessories should be stored as
instructed above.
6. Unproper draining of the pool might cause serious personal injury and/or
damage to personal property.
7. Check the product for damage at the beginning of each season and at
regular intervals when in use.
Joint line
For support please visit us at:
www.bestwaycorp.com/support
©2017 Bestway Inflatables & Material Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte
vorbehalten/Tutti i diritti riservati
®™ Trademarks used in some countries under license to/
Marques ®™ utilisées dans certains pays sous la licence de/
Marcas comerciales ®™ utilizadas en algunos países bajo la licencia de/
®™ Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/
®™ Marchi utilizzati in alcuni paesi concessi in licenza a
Bestway Inflatables & Material Corp., No.3065 Cao An Road, Shanghai, 201812, China.
Manufactured,distributed and represented in the European Union by/
Fabriqués, distribués et représentés dans l’Union Européenne par/Fabricado, distribuido y
representado en la Unión Europea por/
Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto, distribuito e
rappresentato nell'Unione Europea da
Bestway (Europe) S.r.l., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano), Italy
Distributed in North America by/Distribués en Amérique du Nord par/Distribuido en Norteamérica por
Bestway (USA) Inc., 3411 E. Harbour Drive, Phoenix, Arizona 85034, United States of
America
Tel:1-855-838-3888 (For U.S. and Canada)
Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en Latinoamérica
por/Distribuído na América Latina por
Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel,
Santiago, Chile
Distributed in Australia & New Zealand by
Bestway Australia Pty Ltd, Unit 10/71-83 Asquith
Street, Silverwater, NSW 2128, Australia
www.bestwaycorp.com
Made in China / Fabriqué en Chine / Fabricado en China / Hergestellt in China / Prodotto in Cina
