12
3.1.5 Set or Read Variables
•
on
Set/Read number of lanes
The total physical number of lanes on your track.
on<cr>
Reads the current setting.
on4<cr>
Set to 4 lane track
•
ol
Set/Read lane character
Indicates lane 1 in the response to the ra, rg and rp commands.
ol<cr>
Reads the current setting.
ol0<cr>
Set to ‘A’
ol1<cr>
Set to ‘1’
ol2<cr>
Set to ‘a’
ol3<cr>
Set to ‘A’ (Refer to details for reasoning of this.)
•
op
Set/Read place character
Indicates place in the response to the ra, rg and rp commands.
op<cr>
Reads current setting of placement character.
op0<cr>
Set to ‘a’
op1<cr>
Set to ‘A’
op2<cr>
Set to ‘1’
op3<cr>
Set to ‘!’
•
om
Set/Read lane mask
Mask off the lane specified until reset with om0,on or power cycle.
om<cr>
Reads the current setting.
om3<cr>
Mask lane 3
om0<cr>
Resets mask to use all lanes
•
od
Set/Read number of decimal places in the result values.
od<cr>
Reads current number of decimals
od3<cr>
Set to 3 decimals
od4<cr>
Set to 4 decimals
od5<cr>
Set to 5 decimals
•
or
Set/Read automatic reset delay
Set the delay up to 255 seconds.
or<cr>
Reads current setting of reset delay in seconds
or10<cr>
Set to 10 seconds
or30<cr>
Set to 30 seconds
or0<cr>
Auto reset off
