Instruction manual
23
English
oPErAtIon - General information
The chocolate fountain is
only intended for domestic use,
not for professional use.
1. Control panel
2. Base with motor and heating
element
3. Rising tube foot piece
4. Stainless steel bowl
5. Rising tube
6. Bottom chocolate plateau
7. Middle chocolate plateau
8. Top chocolate plateau
9. Chocolate screw
10. Motor shaft
11. Power cord and plug
12. Chocolate shapes trays (x4)
13. Forks (x6)
14. Cleaning brushes (x2)
oPErAtIon - Using for the first time
1. Remove the packaging.
2. Thoroughly clean the device with a warm, damp cloth in order to remove any manufacturing residue (see
“Cleaning and maintenance”).
oPErAtIon - Using the chocolate fountain
You can use the chocolate fountain to dip small products in melted chocolate to make a fun dessert. The
forks enable you to dip pieces of food in the chocolate fountain and to remove them when they are done. The
chocolate shapes trays can be used to make small chocolates.
oPErAtIon - Assembly
1. Place the foot piece of the rising tube onto the three pins in the middle of the stainless steel bowl. Note
that the three recesses in the inner ring of the foot piece should be placed on the bottom side.
2. Place the rising tube on the foot piece and rotate it until it falls into the recesses in the foot piece.
3. Place the screw with the opening facing downwards in the rising tube. Rotate the screw by hand until the
opening at the bottom is secured to the motor shaft.
4. Slide the largest of the three chocolate plateaus onto the rising tube with the convex side facing upwards
and press it downwards. The plateau will rest approximately halfway along the rising tube on a ridge.
5. Slide the middle of the three chocolate plateaus onto the rising tube with the convex side facing upwards
1
2
4
5
6
7
8
9
10
11
13
14
12
3
Содержание DUE4007
Страница 40: ......