![background image](http://html1.mh-extra.com/html/bestron/avc225w/avc225w_instruction-manual_2741411026.webp)
OPERATION - General
The appliance is intended only for domestic use, not for professional use.
1. Charging holder
2. Mains adapter
3. Connection plug
4. Motor housing
5. Connection contacts for
handheld vacuum cleaner
6. Handle
7. On/Off switch
8. Charging light
9. Dust/liquid-receptacle release button
10. Removable filter
11. Dust/liquid receptacle
12. Crevice tool, for crevices and corners
13. Nozzle with brush
14. Nozzle with Rubber attachement
OPERATION - Before first use
Remove the appliance and all accessories from the packaging
OPERATION - Fitting the connection plug to the charging holder
1. Insert the adapter’s (2) charging plug (3) through the opening in the base of the charging holder (1).
Turn the connection plug clockwise through 90 degrees.
OPERATION - Mounting the charging holder to a wall (optional)
You can put the charging holder on a worktop;
you can also mount it on a wall. This will enable
you stow the hand-held vacuum cleaner neatly in
a permanent storage place.
OPERATION - Charging the batteries
1. Fit the hand-held vacuum cleaner to the charging holder.
2. Put the adapter into the wall socket. The charging light of the vacuum cleaner will now illuminate.
3. Allow the hand-held vacuum cleaner to charge for at least 16 hours. The adapter may become slightly
warm whilst it is charging. This is normal, and does not indicate that the appliance is defective.
4. Remove the adapter from the mains socket.
5. The appliance is now ready for use.
ATTENTION:
• The hand-held vacuum cleaner could fall off the charging holder or the charging system could fail if
it is not positioned correctly.
3
1
12
13
7
9
8
5
4
6
11
14
10
2
1.
26
EN