Bestron AFS45RE, Инструкция по эксплуатации, Страница: 28 / 48

instruction manual
28
English
operAtion - Ventilate
1. Set the fan on the floor, on a level surface.
Figure 5
Loosening the height lock to adjust the height of the stand
2. Adjust the stand to the required height. To do so, loosen the height lock (anticlockwise). Adjust the
stand to the required height, and tighten the height lock (by turning it clockwise).
Figure 6
a
b
Tilting the fan
3. Tilt the fan to the required angle. You can set the fan:
a. to blow horizontally (position a) or angled slightly downwards (position b). Tilt the ventilator housing
and motor housing to the required angle.
b. to oscillate from left to right (with a sweep of 90°). This will ventilate much of the room. Press the
oscillation button on the motor housing fully in.
c. remain in the same position whilst the fan is turning. This will ventilate one area. Pull out the
oscillation button until you hear it click.
4. Put the plug into the wall socket.
Figure 7
Operating the fan