![background image](http://html.mh-extra.com/html/bestron/8712184050567/8712184050567_instruction-manual_2740904025.webp)
25
EN
8. Select an appropriate location and fix the fan
onto a strong wall using the wall plugs and
screws supplied (see figure 2), or locate a stud
behind plaster boards.
9. Connect the plug to a wall socket.
OPERATION - Ventilate
1. Connect the plug into an electrical socket and switch on at the wall.
2. You can control your wall fan either with the remote controller or with control buttons on the control
panel.
3. Press the “ON/SPEED” button. At first start-up the fan will operate at low speed.
4. Press the same button to choose between Low, Medium and High speed.
5. Press “OSC” button to switch on the oscillation mode.
OPERATION - Timer mode
The appliance can be turned off manually by pressing the OFF button. However this appliance is fitted with
a timer with allows you to shut off the appliance at the end of a pre determed time. By pressing the TIMER
button repeatedly you increase the time in increments of 0.5 hours.
Example:
If you want to shut off the appliance after 3,5 hours, press the TIMER button repeatedly, till the indicator
lamps 0,5h, 1h and 2h are lit at the same time.
OPERATION - Remote control
The appliance can be controlled by use of the control
panel, but also with the remote control.
For optimal use:
•
The distance between the appliance and
the remote control should,nt be more than 6
meters.
•
Point the remote control at the appliance
and be sure that the angle is smaller than 30
degrees.
CLEANING AND MAINTENANCE
Over the course of time dust can accumulate between the spokes in the fan housing, and on the fan blades.
Always begin by trying to remove the dust with a brush and/or vacuum cleaner.
If this does not remove all the dust you can always dismantle the fan and clean it.
1. Remove the plug from the wall socket.
2. Loosen the bolt in the rim around the fan housing using a small crosshead screwdriver.
3. Remove the rim and the front half of the filter housing.
4. Hold the fan blades to stop them from turning, and unscrew the spinner by turning clockwise in the
direction of the ‘LOOSEN’ arrow. Remove the fan blades from the motor housing.
5. Remove the rear half of the fan housing by turning the locking ring at the centre of the housing
anticlockwise. Remove the ring and the housing from the motor housing.
6. Clean the dismantled parts and the base with a damp cloth. Dry thoroughly with a dry cloth.
7. Clean the motor housing with a dry cloth.
max. 5 mtr
max. 30˚
max. 30˚
Содержание 8712184050567
Страница 2: ......
Страница 39: ......
Страница 40: ...v200922 02 BESTRON COM WHATSAPP NEED HELP CHAT WITH US WHATSAPP CUSTOMER SERVICE ...