WrapAround™ Windjammer™ – Installation Instructions
Rev. 1 1007
80041 pg. 2
Parts List
Windjammer™
Qty - 1
Male Side Release Buckle,
Part Number 363.91
Qty - 4
Wrap Fabric around Bows
Remove Pivot Brackets
Remove Top Assembly
Remove Rear Window
Open zipper on Rear Window. Pull the Tailgate Bar
out of the mounts on the vehicle. Slide the Tailgate
Bar off the Rear Window and set it aside to be
used later.
Release the front of the top from the windshield
and lay the bows down. Refer to owner's manual
for instructions.
Fold the Top Down
Wrap the top fabric tightly around the bows. Then
wrap the legs tightly around the top fabric.
Pull Tailgate Bar out
of Tailgate Mounts
Slide Tailgate Bar off
of Rear Window
Wrap fabric
around bows
Wrap fabric legs
around top fabric
Use a T30 Torx to remove the soft top assembly.
Use a T30 Torx to remove the main Pivot Brackets
on both sides of the vehicle.
T30 Torx
Remove Bow and
Fabric Assembly
T30 Torx
Remove Pivot
Bracket
