80062 2
Rev. A 1298
Step One
Fold the seats forward in order to stand in the back
of the vehicle.
Orient the Windjammer with the snap flap toward
the front.
Drape the Windjammer over the header with the
snaps toward the front. Snap the flaps to the
header panel on each side of the dome light.
Note:
If this product is being used with a
Bikini, unfasten the back of the Bikini in
order to proceed with the Windjammer
installation.
Double Snaps
Front
Header
View from inside vehicle -
looking toward rear
Windjammer
Step Two - Optional
If a you are using a Bikini with the Windjammer
, locate the
three reinforced plastic areas along the top, rear of the
Windjammer (a small arear near each corner and a large
area in the center). Cut through the center part of each
reinforcement. Thread the snap flaps on the Bikini through
the large, center opening. Snap the flaps to the double
snaps on the Windjammer, on each side of the dome light.
Then feed the rear straps through openings at the corners of
the Windjammer and attach them to the handles inside the
vehicle.
Windjammer
Bikini
View from inside vehicle -
looking toward rear
Front
Windjammer
Snap Bikini to Double
Snaps on Windjammer
Corner Straps - Cut
through center part of
plastic reinforcement,
feed straps through
and attach to handle
Snap Flap - Cut through
center part of plastic
reinforcement,thread
through opening and
snap to double snaps