Step One
Release Windshield Latches. Release the
latch that secures the header to the wind-
shield. Pull up on the lever and then down
and out to release the hook from the loop in
the windshield frame
Step Three
Use a phillips screwdriver to remove the four
(4) screws that attach the fl aps in the top to
the Rear Bow. Allow the bow to drop onto the
tailgate
Set the screws aside to be reused
later.
Step Two
Release the rear corners of the
top. Pull gently down and then out
to release the plastic strip from the
retainer on the vehicle.
Step Four
Use a phillips screwdriver to remove the fi ve
(5) screws that attach the fl ap in the top to
the Center Bow.
Set the screws aside to be
reused later.
Section 2
Remove Fabric and Side Bows from Header
