HOSS
™
Door Cart Installation Instructions
Install Door Cart Pan
Install Rubber Strips
The maximum load for
the Door Cart is 235
lbs.
Install Dividers in Door Cart
Insert the Dividers into the holes along the sides
of the Cart Pan. The ends of the Dividers should fi t
securely into the mounting holes.
Store taller doors toward the back
of the Door Cart with shorter doors
toward the front.
NOTE
Front
Store taller doors toward the back
of the Door Cart with shorter doors
toward the front.
NOTE
Orient the Door Cart Pan on the Door Cart Assembly
so the holes in the lower ledge along the side of the
pan are toward the bottom of the pan in relation to
the holes in the top layer. Align the mounting holes in
the pan with the mounting holes on the Angle Legs
and install a 1/4-20 x 1.5 Truss Head Screw, 1/4"
Washer and 1/4-20 Hex Nut in each hole.
Tighten the Truss Head Screws then tighten the
Acorn Nuts that secure the Casters to the Door Cart.
Holes in bottom
must be lower
than holes in top
1/4-20 x 1.5 Truss
Head Screws
1/4" Washers
and 1/4-20
Hex Nuts
Orient the Rubber Strips along the top of the
mounting ridges, over the heads of the Truss Head
Screws. Center the strips from top to bottom on the
pan. Peel the backing off the strips a little at a time
and press them fi rmly into place.
Install Rubber
Strips on ridges
