HighRock 4x4
TM
Front Bumper Installation Instructions
Rev. D 1112
42908 / 44908 / 42905 / 42906 / 44906 pg. 4
Install Bumper Assembly
Install 42905 HighRock 4x4
TM
Approach Roller
TM
– Sold
Separately
Place the Roller between the fl anges on the Front
Bumper and align the holes in the Roller with the
holes in the fl ange. Slide the Rod through the fl ang-
es and the Roller. Install a Hex Bolt and a Washer
in each end of the Rod to secure it to the fl anges.
Lift the Front Bumper Assembly onto the
front frame rails on the vehicle. Reinstall
the hardware that was removed in step 3.
If you are not installing an optional Tubular
Grill Guard, go to Step 7.
Two or more people are required
to lift the bumper safely.
Bumper
Reinstall 18mm
Bolts
Reinstall 19mm
Bolt
Roller
Rod
Flange
Washer
Hex Bolt
If you intend to install a winch only, you
may install it directly on your bumper
and do not need to use the Fare Lead Plate.
NOTE
Place the Front Bumper on a fl at surface. Place the
Fare Lead Plate assembly on the bumper and align
the mounting holes. Place the winch on top of the
plate and use the hardware provided with the winch
to secure it to the bumper.
Install Fare Lead Plate and/or
Winch on Bumper
Front Bumper
Fare Lead Plate
Winch
Use the hardware supplied
with your winch to install it
on the bumper