Bestrail
™
Soft Tonneau Installation Instructions
Rev. A 0208
42712 / 42722 / 42732 / 42742 / 42752 / 42762 pg. 3
Install Tie Down Straps on
Tailgate Brackets
Slide the loop on a Tie Down Strap over the fl at
end of each Tailgate Bracket.
Install Tailgate Brackets on
Tailgate Bar
Slide a Tailgate Bracket into each end of the Tail-
gate Bar. Align the hole in the Tailgate Bracket with
the holes in the Tailgate Bar and install a 1/4-20 x
3/8" Set Screw to secure each bracket to the bar.
Measure the distance between the inside faces of
the Left and Right Side Bestrails™. This measure-
ment should be 58-3/4". If it does not measure cor-
rectly, adjust the BestRail™ channels by loosening
the set screws in the brackets at the front of the bed.
Adjust the rear by loosening the clamps that secure
the side rails to the bed. Reposition the Bestrail™ as
needed and retighten all bolts.
Check Alignment
58-3/4"
58-3/4"
#8 x 5/8" Oval
Screws
Reinstall BestRail™ Corner Caps
Use the #8 x 5/8" Oval Screws that were removed in
Step 1 to reinstall the Corner Caps to the Beltrail™.
Corner Cap
Tailgate Bracket
Tie Down Strap
Tailgate Bracket
Tailgate Bar
1/4-20 x 3/8"
Set Screw
